Use and Care Manual

Queenstown Gray Milk Paint
Section 9. Physical and chemical properties
Physical state
Melting point
Vapor pressure
Relative density
Vapor density
Solubility
Liquid. [Viscous.]
Not available.
1.25
Not available.
Not available.
Soluble in water.
Not available.
Odor
pH
Gray.
Color
Evaporation rate
Not available.
Auto-ignition temperature
Flash point
Not available.
Closed cup: >98.889°C (>210°F)
Not available.
Not available.
Viscosity
Dynamic (room temperature): 2000 mPa·s (2000 cP)
Not available.
Odor threshold
Partition coefficient: n-
octanol/water
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
Appearance
Boiling point
:
Not available.
Flammability (solid, gas)
:
Not available.
Lower and upper explosive
(flammable) limits
:
Not available.
Decomposition temperature
:
Not available.
Flow time (ISO 2431)
:
Not available.
VOC content
:
83.672 g/L
Section 10. Stability and reactivity
Hazardous decomposition
products
Conditions to avoid
Protect from freezing.
Under normal conditions of storage and use, hazardous decomposition products should
not be produced.
The product is stable.
Chemical stability
Reactive or incompatible with the following materials: oxidizing materials.
:
:
:
Incompatible materials
:
Possibility of hazardous
reactions
:
Under normal conditions of storage and use, hazardous reactions will not occur.
Reactivity
:
No specific test data related to reactivity available for this product or its ingredients.
7/12
Tel : +1-888-GHS-7769 (447-7769) / +1-450-GHS-7767 (447-7767)
www.kmkregservices.com www.askdrluc.com www.ghssmart.com