Instructions / Assembly

GENERAL FOAM PLASTICS CORPORATION
PRE-LIT PRODUCTS
IMPORTANT SAFETY INSTRUCTIONS
When using electrical products, basic precautions should always be followed including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
CAUTION:
1) To reduce the risk of re and electric shock: Do not mount or support strings in a manner
that can cut or damage wire insulation.
2) Do not overload. Connect End-to-End a maximum of three (3) lighting strings or decorative
outts of the same type.
* Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use.
When products are used in outdoor applications, connect the product to a Ground Fault
Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualied
electrician for proper installation.
* This seasonal use product is not intended for permanent installation or use.
* Do not mount or place near gas or electric heaters, replaces, candles or similar sources
of heat.
* Do not secure the wiring of the product with staples or nails, or place on sharp hooks or
nails.
* Do not let lamps rest on the supply cord or on any wire.
* Unplug the product when leaving the house, when retiring for the night, or if left
unattended.
* This is an electric product-not a toy! To avoid risk of re, burns, personal injury and
electric shock, it should not be played with or placed where small children can reach it.
* Do not use this product for other than its intended use.
* Do not hang ornaments or other objects from cord, wire or light string.
* Do not close doors or windows on the product or extension cords as this may damage the
wire insulation.
* Do not cover the product with cloth, paper or any other material not part of the product
when in use.
* This product is equipped with push-in type lamps. Do not twist lamps.
* This product employs overload protection (fuse). A blown fuse indicates an overload or
short-circuit situation. If the fuse blows, unplug the product from the outlet. Also
unplug any additional strings or products that may be attached to the product. Replace
the fuse as per the user servicing instructions (follow product marking for proper fuse
rating) and check the product. If the replacement fuse blows, a short-circuit may be
present and the product should be discarded.
* Read and follow all instructions that are on the product or provided with the product.
SAVE THESE INSTRUCTIONS.
084-120746

Summary of content (2 pages)