Use and Care Manual

UNPACKING

Carefully unpack and remove the unit and its components from its shipping container and check for missing or

damaged items as per the list of contents below.

NOTE: PLEASE REPORT ANY DAMAGED OR MISSING ITEMS TO YOUR GENERAL® INTERNATIONAL DISTRIBUTOR IMMEDIATELY.

BASIC FUNCTIONS

This 7” x 10” horizontal metal cutting band saw is designed for both vertical and horizontal cutting in metalworking

and machine shops for cutting various types of bar stock, channel stock, piping, and thin-walled tubing.

With four blade speeds to accommodate a wide range of cutting needs, the unit features an automatic hydrauli-

cally controlled down feed with auto shutoff at the end of the cutting cycle.

The coolant system with built-in pump is designed to supply a continuous ﬂow of liquid coolant to the cutting area

to prevent overheating of both the blade and the workpiece, providing cleaner cuts and prolonging blade life.

ADDITIONAL REQUIREMENTS FOR SET UP

A. EXTRA PERSON FOR HELP WITH LIFTING

B. PHILLIPS SCREWDRIVER

C. 10, 12,14 & 20 MM WRENCHES

D. 4 & 6 MM ALLEN KEYS

E. PLIERS

F. SQUARE

D E

LIST OF CONTENTS QTY

PULLEY COVER ......................................................................... 1

B. COOLANT FILTER ...................................................................... 1

C. LOCK KNOB ............................................................................. 1

D. HEX HEAD BOLT ....................................................................... 2

E. WORKPIECE STOP .................................................................... 1

F. VERTICAL CUTTING TABLE ....................................................... 1

G. WHEEL ...................................................................................... 4

H. WHEEL AXLE ............................................................................. 2

I. STOP SHAFT .............................................................................. 1

J. COTTER PIN ............................................................................. 4

K. FLAT WHEEL WASHER ................................................................ 4

L. PULLEY COVER WASHER .......................................................... 2