Operation Manual

4 - 66
Owner's Manual
Edit Section
Sounds
The Commands common to both Edit Displays
The “Normal” Sounds and Drumkits have the following commands in common.
LIBRARY, STORE, COMPARE, EFFECTS.
When the options are selected, they are shown in reverse-highlight.
EFFECTS
When the EFFECTS option is highlighted (selected) the Sound is edited “wet”.
To bypass the Effects
Deactivate the EFFECTS option to bypass the Effects processor (reverse-highlighting
is cancelled) and edit your sound “dry”.
If you want to hear the Sound in edit with a different effect, press the EFF 1/2 button to
access the EFFECTS menu then select the Effect required. If both Effects are enabled,
go into Performance Edit and set the Effects parameter to the required status.
Note: when you temporarily escape the edit, you will not hear the Sound in its current
edited form, but the one assigned to the track of the current performance. The Sound must
be Stored to the current Performance before being heard (see Store).
Press the SOUNDS button to return to the sound in edit.
COMPARE
COMPARE is used to compare the modified sound with the original ROM sound. This
is an important command which helps you to monitor even the smallest parameter
changes.
Simply press COMPARE at any time while editing to recall the sound’s original
parameter values.
Downloaded from www.Manualslib.com manuals search engine