Operation Manual

4 - 68
Owner's Manual
Edit Section
Sounds
Press ENT. You will leave the Search option and the first available sound containing the
sequence of specified characters will be displayed:
At this point, you can also rotate the DIAL or use the Up/Down cursor arrows to search
for other related sounds within the same family.
Use the Sound Banks to go directly to a Family
You can go directly to a Sound Family by pressing the relative Sound Bank.
Substitution of the sound in edit with another from the Library
After accessing the Library, select a sound by using Search, by rotating the Dial, or by
using the Up/Down cursor arrows.
Press ENT to substitute the sound currently in edit with the selected one:
Press EDIT to access the Edit of the selected sound:
N.B. The substituted sound will also be assigned to the selected track of the current
Performance.
RESTORE: use this option to restore the original parameter values of the sound
currently in edit.
NOTE: This is only valid for the Sound in edit for the current Performance.
Restore does not affect other variations of the same sound stored elsewhere.
The “Are you sure” display is shown where you can choose to confirm the
“Restore” command, or refuse with ESC and retain the modifications.
IMPORTANT
You cannot add, move
or delete the ROM
sounds in the Library.
Note that the top
bar of the
display
continues to
show the sound
currently in edit.
Note the change
in the top bar of
the display.
Downloaded from www.Manualslib.com manuals search engine