Operation Manual

Owner's Manual
4 - 75
Edit Section
MIDI
A particular setting for all Performances of all modes can be fixed by setting “MIDI
Channel Lock” to “ON” (see “Other” MIDI page discussed further ahead).
What does WX transmit and receive ?
WX transmits and receives the following information:
Note On message generated by pressing a key. Included in the message is the Note
Number and the Velocity with which the Note is pressed;
Note Off message generated by releasing a key. Included in the message is the
Velocity with which the Note is released;
Program Change message generated when a sound is changed (the number of the newly
selected sound is transmitted);
After Touch message generated by key after-pressure and used to modify the notes
being played. WX transmits Channel pressure and receives Channel and
Poly pressure;
Pitch Bend Change message typically generated by the movement of the wheel
using left-right movements. This message alters the Pitch of the note with
an excursion of ±2 semitones;
Control Change message generated when a controller other than a key (e.g. a Wheel,
Pedal, Switch, etc.) is moved in order to modify a sound of a note
(modulation, sustain, volume, etc.). Also included are Bank Change data,
transmitted and received on the MIDI Common. WX generates this type
of data by selecting a Bank and its associated element (Real Time
Performance, Int. Style, etc.).
The control change messages transmitted and received by WX:
Channel Pressure:
Pressing a key affects
the entire MIDI
channel.
Poly Pressure:
Poly affects only the
note to which pressure
is applied.
(00) Controller 0†
(01) Modulation
(04) Foot controller
(07) Main volume†
(10) Panorama
(11) Expression
(12) Attack GEM
(13) Release GEM
(14) Filter 1 GEM
(15) Filter 2 GEM
(74) Rec†
(75) <<††
(76) >>††
(77) Punch††
(78) Man. Perf.††
(79) Sync††
(80) Tempo fix††
(90) Rotary Slow/
Fast††
(20) Filter 1+2 GEM
(64) Damper
(66) Sostenuto
(67) Soft pedal
The following are not
transmitted, only received
(70) Start/Stop††
(71) Var/Cont††
(72) Intro/End††
(73) Fill/Tap††
WX can generate the data from 00 - 67 and 90 by assigning the relative controller to a
programmable Pedal. Modulation (01) is also generated by the Wheel and the Foot
command (04) is generated by a Pedal connected to the Volume socket on the rear panel.
The control data
identified with the
symbol † is also shared
by the Common
channel.
Data identified with the
double symbol †† is
transits only on the
MIDI Common channel.
Controller 0 transmitted
on the Common channel
is interpreted as Bank
Change data - see Bank
Change data.
Downloaded from www.Manualslib.com manuals search engine