Operation Manual

5 - 18
Owner's Manual
Styles, Songs & Sequencer
Programmable Styles
For this function, it is useful if one of the programmable Pedals (Logic) is already
programmed for PUNCH operation before starting the recording, otherwise, you
must escape Record mode and enter Edit Status to programme a pedal accordingly.
If your recorded Riff contains a short sequence of wrong notes, select PNCH in
the Mode function. Start the recording and, an instant before you reach the point
where the wrong notes are about to play, press the punch pedal and play the correct
sequence of notes - they will be inserted in normal (replace) mode, substituting the
events present. When you have played the correct sequence of notes, release the
pedal and the recording will return to DUBB mode.
C) You can UNDO the recording and start again.
While still in REC mode, press UNDO. The recorded events will be cancelled.
Press Start and start to record the Riff again.
Note: If you Undo the second recording, you will restore the previous one.
D) You can QUANTIZE the recorded events to optimise the recorded Riff. This
function is discussed in detail in the Quantize section of Edit Sequencer.
Quantize is an auto-correct function which optimises your recording by adjusting
the timing of each recorded event.
Note:Several other Event Edit functions are available in the Edit Sequencer section.
Refer to the relevant chapter for more details.
10. Select the next track to record.
Use the Down cursor arrow to select the next Track.
Follow the procedures as described from point 7 and repeat them for the other
tracks.
11. When you have finished recording all the Tracks for the first Riff, select
another one.
Select the required Riff (Intro, Fill, etc.) and record all the remaining Tracks as
already described.
Continue in this way until you have recorded at least:
BASIC Major (or minor or 7th)
FILL Major (or minor or 7th)
INTRO Major (or minor or 7th)
END Major (or minor or 7th)
With these four Riffs, you will at least guarantee a pattern for every chord change.
If you exploit the Minor and Seventh Riffs as well as the Variation option, you can
obtain up to 18 different patterns.
12. When you have completed the recording, press ESC to escape Record mode.
F1
Press F1 to return to
the Riff select mode as
shown on the right
Downloaded from www.Manualslib.com manuals search engine