Operation Manual

5 - 22
Owner's Manual
Styles, Songs & Sequencer
Programmable Styles
Modifying the Step recordings
If you make a mistake, you can replace the old events with new ones from any position.
Simply return to the Step recording and use the Up/Down cursor arrows to select the song
pointer.
Position the horizontal reverse-highlight cursor to one note before the starting point and
record the note or sequence of notes required. The new note will substitute the note after
the starting point and all subsequent new notes will follow, replacing all old events.
Use the Toggle to specify a starting point
In cases where there are many events, you can go directly to the beginning of a bar by
hitting the Toggle:
The first value of the Song pointer activates and opens a box where you can specify the
bar required.
Use the black keys corresponding to the numbers 0 - 9 to enter the required value and
confirm with Enter.
NOTE: Step recordings only record notes, not Control data.
If necessary, you can record Control data in Real Time.
Simply return to Real Time record mode (F8) and start the recording (make sure the track
is in REC mode).
Regulate the Track Ball or the Pedal to which a control has been assigned (Volume,
Modulation, Pitch, Filter, etc.). The relative events will be recorded in the Master Track
or the Tracks, depending on the type of data.
Another method makes use of the INSERT function in the Microscope. See “EDIT
SEQUENCER” for more details.
Downloaded from www.Manualslib.com manuals search engine