Operation Manual

Owner's Manual
5 - 29
Styles, Songs & Sequencer
Song Styles
Give your Song Style a name
Use the NAME function in the EDIT SEQUENCER section to give your Song Style a
name.
Use the same operations as those used to name the Programmable Styles (see page 5-19).
Muting or disengaging recorded tracks
If you have recorded both tracks 5 and 6, your Song Style can only be used as backing
in playback mode. You will not be able to play any tracks engaged by the Sequencer in
real time.
The tracks engaged by the Sequencer (shown as “SEQ”) can be muted (“Off”) or
disengaged from the Sequencer and played in real time.
Use the operations explained to disengage the Internal Style tracks (see page 5-6).
Song Style Performances
Song Styles depend on Internal and Prog. Style Performances. Owing to the fact that each
Style (Int or Prog.) is associated to only one Performance, this limits Song Styles to only
one Performance for each Style change. The M. Perf function in the Master Track
overcomes this limitation.
If the M. Perf function is enabled (ON) in the Master Track of the Song Style, the relative
Song Style Performance is rendered programmable (only tracks 5 and 6) and it can be
copied up to 7 times to create other Song Style Performances. Each copy can then be
modified at will by assigning different sounds to track 5 and 6 for each Performance.
In practice, the M .Perf function in Song Style mode allows the selection of other Song
Style Performances in the Song Bank because the Song Style’s dependence on the Style
Performance is overridden.
If the M. Perf function is Off, any modifications made to the Performance will be
cancelled when you start the Playback.
How to create up to 8 Song Style Performances
Each Song Style can be associated to up to 8 Song Style Performances by exploiting the
M. Perf function.
These are shown by selecting P.SONG and selected by pressing the relative Function
buttons.
Unless you load a Song or Song Style from disk that is associated to more than one Song
Style Performance, you will have to create them. Normally, pressing the P. SONG button
shows one Performance and all other slots “empty”.
The Song Style Performance can only be modified in the two tracks 5 and 6 - the
remaining tracks (1, 2, 3 & 4) rest unchanged. In practice, changing Song Style
Performance changes the sounds of one or both tracks 5 and 6.
Procedure
It’s best to create the Song Style at first without recording any events.
1. First create the Song Style by entering record mode as already explained.
Downloaded from www.Manualslib.com manuals search engine