Operation Manual

Owner's Manual
5 - 35
Songs and the Sequencer
Songs
Where are the Songs stored?
The recorded SONGS reside in the Song Banks which are accessed by pressing the
SONGS button.
The WX is supplied with two Songs loaded into the instrument’s SRam. Turning on the
instrument loads both Songs into RAM and if you press the SONGS button in the
Sequencer & Users section, the display shows the following:
Each Function button can select a Song Bank consisting of 1 Song and up to 8 Song
Performances.
The Song Performances
The Song Performances; if present, are accessed by pressing the P. SONG button in the
Performance & Style Banks in Song Mode. All Song Performances can be configured
with up to 16 tracks.
Examine, for example, the “DEMOWX” Song - press P.SONG and the display shows
8 Song Performances, 4 of which are used to record the Song.
Every Song Performance can configure each Track independently (see Edit Perf);
it memorises a track’s MIDI channel and Out port;
its destination (internal sound engine and/or MIDI Out);
it’s association with the instrument’s physical controllers;
with the Effects processors;
its Transpose and Tuning status;
and other parameters, as already explained in the previous chapters.
Exploiting the Real Time Performances
To record a Song you can exploit the default Real Time Performances by entering Song
record mode with the currently selected R. T. Performance.
You can also customise the Performances according to your needs and save any
modifications with Enter.
Up to 8 recorded Songs can be stored in the 8 Songs Banks (one in each) and at any time,
NOTE:
Use the Up/down cursor
arrows to scroll the
tracks.
Downloaded from www.Manualslib.com manuals search engine