Operation Manual

5 - 36
Owner's Manual
Songs and the Sequencer
Songs
you can save them to disk for reloading at a later time.
You can also save one or more Songs to SRam in order to have some Songs available after
powering up.
Loading Songs from disk
Before playing a Song from a disk, it must be loaded into the instrument’s internal
memory.
You can load your Songs from Disk using one of the Disk functions (Load operations):
Load all Disk loads all the data present on disk.
Load All Song loads all Bank Songs present on disk.
Load Single Song loads only one Bank Song which you can select and direct to
any Bank Song location of your choice.
Refer to the Disk chapter for detailed explanations relating to the above proce-
dures.
Preload
You can also choose to load a Song in background using Preload.
This function reduces the amount of operations required for the loading procedure and
is particularly recommended when playing back Songs.
Preload is discussed in detail in the Disk chapter on page 4-13.
MIDI Files
Bear in mind that WX
can also load Standard
MIDI Files from disk.
Note: Preload is only
operative when the
instrument is in Song
mode.
An attempt to Preload a
song in any other mode
will display the
following message:
Press ESC to cancel the
display and select Song
mode to Preload a
Song.
Downloaded from www.Manualslib.com manuals search engine