Operation Manual

Owner's Manual
5 - 37
Songs and the Sequencer
Songs
Song Playback Mode
◆ If a Song is present in RAM, you can select it by pressing the SONGS buttons
followed by the relative Function button (F1…F8).
◆ Press the START button to start the playback.
The display shows the Song name, the current Song Performance, the starting
Tempo and the Time signature.
Before playback, you can modify;
the Sounds assigned to the Tracks;
the Tempo;
the Track volumes, etc.,
HOWEVER, unless you save the modifications in the Performance (press Edit twice),
starting the song will cancel the modifications and recall the original Performance.
You can disengage tracks used by the Sequencer to play them in real time. The procedure
to use is explained in detail in the Internal Styles chapter, page 5-6.
You can also change the Song name by using the NAME function in the Edit Sequencer
section.
Start a Song from any point
You can start your Song from any position by using the >> or << keys to specify a
different value for the Song Position Pointer.
◆ For example, with the song in the above display example, set the Song Pointer to
a value 16 1 1:
◆ Now press the “CONTinue” button to start the Song from the specified position.
START
STOP
FILL VAR
TAP
CONT
INTRO
END
FILL
Downloaded from www.Manualslib.com manuals search engine