Operation Manual

5 - 46
Owner's Manual
Songs and the Sequencer
Songs
As well as being configured as Tracks 1-14, Track 15 should also be connected to receive
LOCAL data to allow you to hear a sound when you play on the keyboard.
Track 16 should be connected for LOCAL data and the resulting messages directed to
MIDI OUT on OUT port 1 , Channel 1 - MIDI IN must be disconnected and no messages
sent to the WX SOUND generation. This condition is otherwise known as MIDI Local
off. Track 16 can therefore be used to send data to a Computer or Sequencer and prevent
the WX MIDI signal from looping on itself.
The GET function - Create a score of your recording
You can transfer the recorded notes of a track to a musical staff with the GET option of
the SCORE function.
1. For example, after recording a Track, confirm the recorded Track (SEQ) and
escape Record mode.
2. Press SCORE and select GET:
3. Select the track from which the Score is going to be taken and confirm with YES:
4. After a short while, the display shows:
Repeat the same operations for all the recorded Tracks of your Song.
The Edit Status section provides several options to control the viewing possibilities on
an external screen (TV, computer colour monitor). See page 4-33.
Downloaded from www.Manualslib.com manuals search engine