Operation Manual

6 - 2
Owner's Manual
Edit Sequencer
Sequencer
You can program all common and not so common Time signatures because both
parameters (numerator and denominator) are programmable.
Important
The Time Signature can only be changed if the Song is empty (before Record). It cannot
be altered if a song has been recorded, nor during playback.
An attempt to change the Time Signature of a recorded song will provoke the following
warning:
TEMPO This parameter determines the song’s running speed (Metro-
nomic time), measured in beats per minute (BPM).
The value shown refers to the starting tempo of the Song. Value range: 20... 250.
You can modify this parameter only before record start.
The Song’s speed can also be varied in real time by rotating the Dial but this will
not alter the Master Track’s Tempo parameter value.
Songs and Song Styles record real time Tempo variations in the Master Track,
provided the TEMPO Record function is selected before record start. The relative
data are shown as Tempo Set events.
Song Styles also record the activation of the Tempo-Fix button, shown as
TEMPO-FIX events.
Programmable Styles cannot record real time Tempo changes.
COUNTDOWN Enables (On) or disables (OFF) the one bar lead into the
recording after pressing Start.
Deactivating the Metronome does not eliminate the countdown bar.
NB: If the EXTernal clock is selected (in the “MIDI Other” page), the countdown
will be excluded.
METRONOME VOL Adjusts the Metronome sound level (valid for Playback and
Record mode). Value range: 40... 127.
The higher the value, the louder the sound. The lowest limit softens the sound but
does not eliminate it.
UNDO Enables (On) or disables (Off) the Undo function for the Edit
Song and Song Record modes.
Undo permits you to cancel a recorded sequence or restore portions of a cancelled
Song. Undo also restores an Edit Sequencer operation to the status prior to
confirmation. See “UNDO” further ahead.
Downloaded from www.Manualslib.com manuals search engine