Operation Manual

Owner's Manual
6 - 5
Edit Sequencer
Sequencer
Here you can see some Master Volume events, a Program Change and some Tempo Set
events in the left part of the display.
The events show the Song position (Bar, Beat and Sequencer resolution), the name of the
recorded parameter and its relative value.
The right part of the display is where you can specify data to insert or delete.
This function is not available for Programmable Styles.
How to edit Master Track events
Use the following procedure to edit the events shown, including those inserted manually
with the INSERT function explained below.
1. Move an event from one Song position (bar) to another by rotating the Dial.
Example: You can move from 1 3 128 to 4 1 192.
2. Move an event from one beat to another within the same bar by selecting the second
pointer value with the Right cursor arrow and rotate the Dial.
Example: You can move from 1 3 128 to 1 2 128.
3. Move an event from one defined point to another within the same beat by changing
the sequencer resolution value with the Dial.
Example: if you have three events recorded at positions 1 3 128, 1 3 135 and 1
3 137, you can move the first event to position: 1 3 140.
4. You can change the value of the parameter listed under “STATUS” by selecting
its relative value (listed under “VAL”) and rotating the Dial.
Create an event with INSERT
The INSERT function allows you to create an event at the cursor location.
1. With the Right cursor arrow, select the “INSERT” parameter field.
2. Rotate the Dial to select the required parameter.
3. Return to the first value of the Song Point with the Left cursor arrow.
4. Press the Function button corresponding to INSERT (F6) to enter the selected
event at the specified position.
For SONGS, you can choose from the following events to insert:
Performance change Inserts a Performance change event with a default value of 0.
Value range 0 - 7.
Downloaded from www.Manualslib.com manuals search engine