Operation Manual

Owner's Manual
6 - 11
Edit Sequencer
Sequencer
ERASE
This operation erases all events of a specified type from a specified range of bars. You
can perform this operation on a Track, on the Master Track or you can Erase all the Song:
Song specifies the Song from which events are being erased.
Track selects the track to erase from.
You can choose from:
◆ 1 - 16
◆ Master track (Songs and Song Styles)
◆ Chords Track (Songs and Song Styles)
◆ Lyrics (Song only)
◆ Score (Song only)
◆ All (the entire song)
Bar determines the range of bars (start and end) from which the
specified events will be erased.
ERASE EVENTS this edit zone allows you to specify a particular event to erase.
◆ If you are erasing from a Track, you can erase Note events, Pitch Bend data, Mono
Touch and Poly Touch data, Dynamic release data, Program Change data and
control data (from 0 to 127).
◆ If you are erasing from the Master Track (specified in the Track parameter), you
can specify a particular event or All.
◆ If you are erasing from the Chords track, you can only erase Chords.
◆ If you are erasing from the Lyrics track, you can only erase Lyrics.
◆ If you are erasing from the Score track, you can only erase the Score.
Press ENT to execute the operation.
Use UNDO to restore the original status if you make a mistake.
Press ESC or ERASE to leave the function without performing the operation.
NOTE:
You cannot erase indispensable information from the Master Track. The Master
Track always records the initial Tempo, the starting Performance and other vital
data at song point 1-1-1. You can modify these parameters but cannot erase them
at the starting position because they relate to indispensable information that
defines the song.
NOTE:
ERASE ALL provides
two options:
to Erase the Song only,
leaving intact the Song
Performance (or
Performances if others
are present),
OR,
to Erase the entire
Bank/Song - the Song
and all Performances -
leaving an EMPTY
BANK:
Downloaded from www.Manualslib.com manuals search engine