Operation Manual

6 - 14
Owner's Manual
Edit Sequencer
Sequencer
DYNAMIC
Press PAGE + to go to the Dynamic page.
This operation modifies the velocity values (note on) in the specified area by the
specified intensity.
Song Selects the Song to work on.
Track Specifies the track in which to modify the velocities.
Bar Specifies the first and last bar where the velocity modifica-
tion will take place.
Mode Specifies the mode in which the velocity modifications will
be effected.
Two options are available:
1. Normal - adds or subtracts the specified value from the recorded values.
2. Fixed - modifies all the recorded velocities to the specified value.
Change Dynamic Specifies the amount by which the velocity values will
change.
Press ENT to confirm the operation.
Use UNDO to restore the original status if you make a mistake.
Press ESC or TRANSP to leave the function without performing the operation.
This is a great option if, for example, you want to open the Filters of a sound that is
sensitive to dynamic variations, otherwise not possible unless you repeat the recording
with the modified Sound.
Downloaded from www.Manualslib.com manuals search engine