Operation Manual

Owner's Manual
6 - 19
Edit Sequencer
Sequencer
2V specifies the value of the Aftertouch event applied to the note in 1V with values
0... 127.
For example, Aftertouch can add more or less Tremolo effect (if enabled) to a
sound.
Introduce the value 0 to deactivate the Poly Touch effect.
Note: WX does not create Poly Aftertouch events from the Keyboard. You can create
them manually with Insert or the events can be received at MIDI IN.
3V does not apply.
The Microscope functions
Three functions are available in the Microscope: MASK, INSERT and DELETE.
MASK Hides specified events in order to simplify the process of
searching for particular data in order to modify it.
1. Select the event to mask with the Up/Down cursor arrows.
2. Press the Toggle to mask the event, shown by the disappearance of the
symbol “√”. Press the Toggle again to make the symbol re-appear.
3. Press ENT to confirm the operation or ESC to escape the function.
INSERT Selects a type of MIDI event to insert. The event selected will
be created at the selected song pointer. You can use this
function to create Control data otherwise not possible with
the keyboard’s physical controllers.
1. With the Right cursor arrow, select the Insert edit zone.
2. Rotate the Dial to select the required event.
3. Return to the Song pointer.
4. Press INSERT (F6) to execute the event insertion.
5. Modify the event according to your requirements.
DELETE Cancels the data at the selected song position. The cancella-
tion is immediate without the need to confirm with Enter.
In case you delete data accidentally, restore it with UNDO.
Note: you cannot insert
events in an “empty”
song.
If, for example, you
activate Song Edit and
access the Microscope
without at first
recording some events
in one or more tracks,
the insert option will
not allow you to insert
the displayed event.
An attempt to insert the
available event will
display the following
message:
Downloaded from www.Manualslib.com manuals search engine