Operation Manual

Owner's Manual
4 - 7
Edit Section
Disk & SRam
Automatic loading
The LOAD ALL operation is performed automatically when you turn on your WX with
a DISK inserted in the driver.
If, instead, data is present in SRam and no disk is present in the driver
1
, turning on will
Load All from SRam into the instrument's volatile memory (RAM).
Automatic loading of all disk or SRAM data is a very useful method of setting your
instrument up automatically while powering up. During the loading process, you can
occupy yourself with other duties (cable connections, microphones, etc.).
Important
WX is supplied with a RAM of 2 Megabytes (for the Sequencer and Performance data)
and a Static RAM of 256 K Bytes. An optional 2 Megabytes of RAM (Sample RAM) is
available for the exclusive purpose of handling up to 48 additional Samples loaded from
DISK.
In future, an option to expand the Static RAM will be made available by GENERAL-
MUSIC.
2. LOAD ALL SONGS
This operation loads all the Songs present on Disk or in SRam into internal memory. Up
to eight Songs
2
can be loaded simultaneously.
The procedure is the same as for Load All Disk.
3 LOAD ALL STYLES
This operation loads up to 32 Styles simultaneously. The data will be positioned in the
PROGRAMMABLE STYLE BANKS.
The procedure is the same as for Load All Disk.
4 LOAD ALL PERFORMANCES
This operation loads up to 24 Performances belonging to the REAL TIME PERFORM-
ANCE BANKS.
The procedure is the same as for Load All Disk.
NOTE 1:
The DISK has priority
over SRam.
NOTE 2:
The number of Songs
that can be loaded into
SRam will depend,
naturally, on the size of
the songs.
Downloaded from www.Manualslib.com manuals search engine