Operation Manual

Owner's Manual
4 - 9
Edit Section
Disk & SRam
1.3 Press ENT to start the loading operation:
1.4 Confirm the operation with ENTER:
1.5 Complete the operation with ESC to return to the main Load display.
N.B. An optional operation is provided with the F8 function button.
This permits you to load single bank of Style Performances containing user-
programmed performances relating to the INTERNAL STYLES (Bank 1 = Dance,
Bank 2 = Beat, Bank 3 = Rock’n and so on...):
NOTE: You can only load a Style Performance Bank into its corresponding
Memory destination (Bank 1 to Bank 1, Bank 2 to Bank 2 and so on..).
2. LOAD A SINGLE BANK OF REAL TIME PERFORMANCES
Use this operation to load a bank of Real Time Performances (Bank1 = Perf1, Bank2 =
Perf2, Bank3 = Perf3).
The procedure is the same as for Load Bank Style.
Important
For what concerns the
INTERNAL STYLES,
while it is possible to
vary the Sounds
assigned to all the
tracks (the volumes,
transpose parameter,
etc.), related to the
Internal Style
Performances, it is not
possible to cancel the
recorded sequences
contained in the first
four tracks.
In practice, you can
modify the parameters
of the Style
Performances, save the
modifications using the
standard “Save
Performance” function
and save the Bank of
Style Performances to
disk for future use.
Note the
“PERF”
message
Downloaded from www.Manualslib.com manuals search engine