Operation Manual

Owner's Manual
4 - 11
Edit Section
Disk & SRam
4. LOAD SINGLE SAMPLE
Use this operation to load Single Samples from WX disks, from S-Series disks, or from
SRam.
The Load Single Sample operation permits you to scroll through the WX or S-Series
samples available:
You can load a Sample to any destination available from Banks 3 to 8 of the Sample
family.
IMPORTANT:
Samples can only be loaded into the Sample Family Banks (3 to 8) if the instrument is
fitted with the optional 2 Megabyte Sample RAM. Up to a maximum of 48 Samples
can be loaded if the Sample RAM DISP is fitted.
5. LOAD SINGLE MIDI FILE
This operation, although almost identical to the “Load Single Song” example outlined
on the previous pages, differs in the type of files displayed.
What is a Standard MIDI File
This standard makes it possible to use sequence data regardless of the source equipment
or manufacturer. Files of sequencer data created on equipment that conforms to this
standard can be loaded and played back on the WX2/WX400.
The WX recognises Format 0 and Format 1 MIDI files:
Format 0: All data from Tracks 1-16 of a Song are contained on a single track.
Format 1: All data from Tracks 1 - 16 are conserved separately, in the same manner as
when the data is created.
In addition, sequence data created by the WX can be saved to disk as a Standard MIDI
NOTE :
WX reads MIDI File
Format 0 (Single-track
files) and reads and
writes MIDI File
Format 1 (Multi-track
files which conserve the
Song’s Track partition,
records the Tempo and
Tempo variations as
well as the Time
signature).
Downloaded from www.Manualslib.com manuals search engine