Operation Manual

Owner's Manual

4 - 13

Edit Section

Disk & SRam

Preload

This operation makes it possible to load a Song from Disk

or SRam while the sequencer

plays back another.

The PRELOAD MODE, specially studied for use in live situations, permits songs to be

loaded with a reduced number of operations without stopping the sequencer.

1. While a song is in playback mode, press DISK and select PRELOAD:

2. Selecting “Preload” with the DOWN arrow gains direct access to the disk’s song

directory without pressing ENT. The song names will be displayed in correspond-

ence to the function buttons.

3. At this point you only need to press one of the F1-F8 buttons to start the loading

operation.

N.B. To escape from this option press ESC, while, to exit from this display without

escaping the current option, press the DISK button again. You can, therefore, load

a new song using only two manual operations.

Attention. The Preload operation can only be performed in Song mode. Attempt-

ing to preload in any other mode will display the following message:

Cancel the display with ESC.

NOTE 1:

The Preload operation

is only operative with

WX disks.

Downloaded from www.Manualslib.com manuals search engine