Operation Manual

Owner's Manual

4 - 23

Edit Section

Disk & SRam

Press ENT to access the name writing procedure:

The small rectangle on the right is the active zone where the name can be written.

The letters, the numbers and other symbols are silk-screened under the keyboard

and they are entered into the active zone by pressing the relative keys. The flashing

cursor moves one step to the right after each entry.

On the extreme left of the keyboard several functions are provided:

Press “Shift” to write capital letters, press it again to return to small letters;

Use “Space” to create a space;

Use “Delete” to cancel the entry at the flashing cursor position;

Use the arrow “left arrow” (<—) to cancel the last entry;

Use the “back space” (§ ) to move the cursor backwards.

Other symbols (apostrophe, comma, etc.) are located on the extreme right side of

the keyboard.

A name consisting of up to 11 characters can be written (for Disk or SRam only

- all other name situations permit 8 characters).

Press ENTER to confirm the name. Press ESC to escape the function and cancel

all entries.

5) LOAD USER PROGRAM

Another important WX innovation. This function allows new functions, imple-

mented from time to time by GENERALMUSIC, to be loaded from disk to WX.

Press ENTER after selecting the option:

Select the User Program required and press ENT.

Once loaded, access to the new function can be gained by means of the OPTION

button in the SEQ. EDIT. section.

SHIFT SPACE DELETE

Downloaded from www.Manualslib.com manuals search engine