Operation Manual

4 - 32
Owner's Manual
Edit Section
Status
How to programme an Intonation Scale
A new intonation scale can be programmed by modifying one or more notes of one of
the programmable scales (Prog 1, 2, 3 & 4).
The idea is to alter the tuning of one or more notes of the scale to the level desired.
Procedure:
1. Select one of the four Programmable scales and press the note you want to change
- the small scale shows the current standard patch (0):
2. Rotate the Dial to set the required pitch:
This will affect all the same notes across the entire keyboard.
3. Repeat the procedure for all other notes required.
4. Memorise the new Scale by pressing ENTER:
5. Confirm the new scale by pressing ENTER again, or cancel the operation with
ESC.
Now, each time you want to play with your Programmed scale, simply select it in the
relative Status page.
If you want to use your programmed scale permanently, carry out the Save All to SRam
operation with the programmed scale selected. Every time you power up, your scale will
be recalled.
Downloaded from www.Manualslib.com manuals search engine