Operation Manual

4 - 48
Owner's Manual
Edit Section
Effects 1 & 2
The next four Effects display a variation of parameters:
Chorus1_1, Chorus1_2, Chorus2_1, Chorus2_2.
1. VOLUME: The primary Chorus level; setting this parameter to “0” excludes
the action of the Chorus.
Value range 0[-63.50dB] ... 127[0.0dB].
2. FREQUENCY MODULATION: Determines the velocity of the Chorus modu-
lation (its variation is very marked).
Value range: 0[0.3 Hz] ... 28[6.0 Hz].
3. DEPTH: Determines the modulation depth of the Chorus effect.
Value range: 0[-63.50dB] ... 127[0.0dB].
4. FILTER: Determines the timbric quality of the Chorus effect.
Value range: 0[Bypass], 1[0.1 khz] ... 12[16 khz].
A third parameter variation is displayed by the next six Effects:
Flanger1_1, Flanger2_1, Phaser1_1, Phaser2_1, Phaser3_1, Ensemble_1.
1. VOLUME: The primary Flanger level; setting this parameter to “0” ex-
cludes the action of the Effect.
Value range 0[-63.50dB] ... 127[0.0dB].
2. FREQUENCY MODULATION: Determines the modulation speed of the Ef-
fect. Affects only the harmonic content of the sound.
Value range: 0[0.3 Hz] ... 28[6.0 Hz].
3. DEPTH: Determines the modulation depth of the Flanger effect. Affects
the harmonic content of the sound.
Value range: 0[-63.50dB] ... 127[0.0dB].
4. FEEDBACK: Enriches the harmonic content of the sound - an “automodulator”.
Value range: 0[0%] ... 17[96%].
The Rotary Effects provide a configuration of their own:
Downloaded from www.Manualslib.com manuals search engine