Brochure

Cables
3
Rodrunner/Model 88 Standard Cutter Set
Note all cutters illustrated with “G” connector.
If ordering with “L” connector, drop “G” prefix and substitute “L”. For example: L-SHD.
G-HA – Hook Auger
G-4RSB
4" Rotary Saw Blade
G-RTR2
Retrieving Tool
G-SHD
Spear Head
G-2UC
2" U-Cutter
CW – Coupling Wrench
(Fits both “G” and “L” connectors.)
G-3HDSC
3" Heavy Duty Side Cutter
G-3HDB
3" Heavy Duty Saw Blade
Rodrunner/Model 88 Standard Cutter Set
WCC
Wheeled
Cable
Carrier
Holds five
10-ft. sections.˘
G-FSH
Flex-Spear Good in 4" “P” traps.
G-CL
Cutter Leader
Adds flexibility to front of Proflex cables.
G-CA
Cutter Adapter
Converts all cutters on page
30-31 for use with “G” connectors.
CF – Cable Feeding Tool
(Standard with Model 88)
Helps work cable around tight bends.
G-SC
Spade Cutter
Wide blade with sharp edge.
CC
Cable Carrier
Holds five
10-ft. sections.
Flexicore
®
Cable
Wire Rope Center Construction
Heavy-gauge wire coiled tightly around 49-strand air-
craft-type wire rope and heat treated. Has unequalled
strength and the right amount of flexibility. So tough
it carries a one-year warranty against defect or
breakage. Flexicore Patent Nos. 2,244,735 and 2,849,870
General Flexicore
®
Cable with Male and Female Connector
Sectional Cables
Sections for Model 88 and Rodrunner come in the all-purpose
Flexichain which has a chain center, a stiffer Proflex which
has a spring center, and a hollow style. Choose from three
coupling styles. They snap together in a second and are
taken apart quickly with a spanner wrench or uncoupling key.
With the more recently developed “G” connector, no torque
is put on the locking pin when running in reverse, making it
a durable coupling.
Flexichain
®
Section
15R10-P Proflex
®
Cable
Proflex
®
Cable
“G” Connector Pat. No. 3094011 “L” Connector