Datasheet

ECONISTOR
(8E16 & 8E24)
SPECIFICATIONS
Tolerance at 25°C:
±0.005%, ±0.01%, ±0.1%
Temperature Co-efficient:
±3ppm/°C typical over 0°C to +85°C
±5ppm maximum over –55°C to +125°C
Full Load Stability:
±35ppm/10,000hours ±50ppm/26,000 hours
No Load Stability:
±25ppm/10,000 hours
±35ppm/26,000 hours
Power Rating:
0.33 watt (+85°C) 0.25 watt (+110°C)
Maximum Continuous Working Voltage:
Up to 250V DC or peak as determined by PR
Noise: Thermal EMF:
Essentially non-measurable <0.4µV/°C typical <1.5µV/°C maximum
Encapsulation: Leads:
Moulded epoxy 22 AWG tinned copper
Windings:
Balanced multiple π for low reactance. Exclusive ‘air cushion’ technique
provides virtually stressless elements for improved performance. Non-
inductively wound. Direction of winding reversed at half turns point.
FEATURES
±3ppm per degree Centigrade temperature co-efficient
Full load stability ±50ppm maximum after three years
Tolerance ±0.005%, ±0.01% and ±0.1%
Axial leads
From stock in 111 popular standard values; to order in
any value from 1 ohm to 1.1 Meg
OHMIC VALUES
Econistors are available in 111 standard values from 1 to 1M
and in any “non-standard” values from 1 to 1.1M. Three
tolerances are available; 0.1%, 0.01% and 0.005% (0.005%
available on values of 100 and above only). Type 8E16
includes all values below 700K; values of 700K and above
are type 8E24. The types are identical except dimensionally;
Type 8E16 is 12.7mm long, Type 8E24 is 19.05mm long. Both
are manufactured using all welded construction.
Stocked in ±0.1% and ±0.01% in listed values shown below
1 103.90 194.07 680 Ω∗ 4.7K * 27K * 180K
2 107.79 200.00 700 5.0K 30K 200K
5 109.73 212.02 800 5.6K * 33K * 250K
10 111.67 220.00 Ω∗ 820 Ω∗ 6.0Κ 39Κ 300Κ
20 115.54 229.67 900 6.8Κ 40Κ 320Κ
30 119.40 247.04 1.0 Κ 7.0Κ 47Κ 400Κ
40 120.00 250 1.2 Κ∗ 8.0Κ 50Κ 500Κ
50 123.24 270 Ω∗ 1.5 Κ 8.2Κ 56Κ 990Κ
60 125.00 300 1.8 Κ∗ 9.0Κ 6
60.25 127.07 330 Ω∗ 2.0 Κ 9.9Κ 68Κ
62.50 Ω∗ 130.89 350 2.2 Κ 10.0Κ 70Κ
70 134.70 390 Ω∗ 2.5 Κ 12.0Κ 80Κ
80 138.50 400 2.7 Κ∗ 15.0Κ 82Κ
84.27 150.00 Ω∗ 470 Ω∗ 3.0 Κ 18.0Κ 90Κ
90 157.31 500 3.3 Κ∗ 20.0Κ 99Κ
92.16 175.84 560 Ω∗ 3.9 Κ∗ 22.0Κ 100Κ
100 180.00 Ω∗ 600 4.0 Κ 25.0Κ 160Κ
Any non-listed
value from
1
to 1.1M
available to order
RHOPOINT
COMPONENTS LTD
* Stocked in ±0.1% tolerance only. † Stocked in ±0.01% tolerance only.
A number of values listed are RTD simulation values. See page 6 for temperature equivalents.
2
Holland Road, Hurst Green, Oxted, Surrey, RH8 9AX, England
Tel: Oxted 01883717988 — Fax: Oxted 01883 712938
Outside UK Tel: +44 1883 717 988 — Fax: +44 1883 712 938
}
PRECISION WIREWOUND RESISTORS
over full temperature range;
–55°C to +125°C

Summary of content (2 pages)