Operation Manual
5. HDMI
Connector for connection of the Receiver to your high denition TV set.
6. COMPONENT VIDEO
Video output for connection to component YPrPb video-input of your TV set.
7. VIDEO
Output of composite video (CVBS). It is used for transmission of video signal to video input of your TV set.
8. ANALOGUE AUDIO
Two connectors of “tulip” type for connection of additional external audio devices or audio input of the TV
set. Output signal of analogue stereo sound. The right channel – red connector, the left channel – white
connector.
9. POWER SWITCH
Disconnects the digital Receiver from the power mains without disconnecting the power cable from the
wall outlet.
(see 4, pg. 5)
1. STANDBY
The button is used for switching between the «Stand By» mode and the operating mode.
2. CLOCK
It calls the displaying of the current time in the upper right corner of the screen.
3. MUTE
This is used for temporary switching-o of the sound.
4. STATUS
Calls the screen menu containing the information about the version of rmware and software of the
Receiver.
5. 0 ~ 9 NUMERICAL buttons
These are used for calling channels by number and input of numerical data (frequency, etc.).
6. * Button
Varies the resolution of the HD video output.
7. GAME
Calls the list of built-in games.
8. / / / Cursor buttons
These are used for transition between the items of the menu for selection of the variants of certain settings.
When searching the channels, the buttons / would switch the channel to forward /backward as per
the list; whereas the buttons / would control the volume of sound.
9. LAST
Switching to the previously watched channel. In the
Menu – inversion of the list of selected positions.
10. GREEN button
It is used for calling a list of sound tracks available for
the channel. It also oers additional functions when manipulating the screen menu.
59