Operation Manual
61
NOTE!
27. TV/RADIO
The button is used for switching between the modes of receiving of TV programmes and radio channels.
Design of the remote control can be changed without a prior notication.
(see 5, pg. 6)
Connect 2 RCA connectors (red and white) of the cable 3RCA/3RCA to the respectively coloured •
output connectors of the audio on the digital Receiver. Connect the 2 RCA connectors at the other end
of the cable to the respectively coloured input connectors of the audio on your TV set.
Connect the third connector (yellow) of the cable to the VIDEO output of the Receiver, and the •
connector at the other end of the cable – to composite video input of your TV set. In case if your TV set
doesn’t have 3RCA connectors and only has a SCART connector, then you would have to use a special
SCART-3RCA adaptor.
Connect coaxial cable of the aerial to the LNB IN connector on the Receiver.•
(see 6, pg. 6)
Connect 3 RCA connectors of the cable 3RCA/3RCA to the respectively coloured VIDEO connectors of •
the Receiver, and the connectors at the other end of the cable – to the component video input of your
TV set. In case if your TV set doesn't have 3RCA connectors and only has a SCART connector, then you
would have to use a special SCART-3RCA adaptor.
Connect 2 RCA connectors (red and white) of the 2RCA/2RCA cable to the respectively coloured audio •
outputs on the Receiver. 2 RCA connectors at the other end of the cable should be connected to the
respectively coloured audio inputs on your TV set.
Connect coaxial cable of the aerial to the LNB IN connector on the Receiver. •