Operation Manual
For volume control please use the VOL-/VOL+ [18]
or / [8] buttons.
The VOL-/VOL+ [18] buttons are active in the
mode of channel watching as well as in the mode
of on-screen menus. The buttons / [8] are
inactive in the mode of on-screen menus (as well as
in the mode of displaying of the minor information
banner). To temporarily switch o the sound, depress
the MUTE [3] button. To switch on the sound again
depress the MUTE [3] button repeatedly or either of
the buttons VOL+ [18], [8].
Should you need to change the language of
accompanying sound on the current channel,
depress the GREEN button [10]. A menu would
be displayed in the left upper part of the screen.
Selection of audio track is performed with the help
of the buttons / [8].
Type of audio output can be changed using the
buttons / [8]. To exit this menu depress
repeatedly the GREEN [10] button or EXIT [23]. The
type of audio output can be set more precisely in
the menu: Setup – System Settings – Audio setup.
This function would only be active subject to rendering this service by the broadcaster.
While watching/listening to a channel, it is possible
to call the list of channels.
To do that, depress the OK [24] button.
Two options are possible for displaying of the list of
channels: in a single column (10 channels per page)
and in three columns (30 channels per page).
By default the list is displayed as a single column.
To view the list in three columns open the list of
channels and depress RED button [11]. To exit the
list of channels depress EXIT [23].
68
NOTE!