Operation Manual

The Receiver has a built-in teletext STB decoder, which is activated by depressing the YELLOW button [22]
; in the displayed list select Teletext and depress [8] or OK [24]. In the displayed list select language for
the teletext. Control of the teletext is made with the help of numerical buttons of the remote control. To
exit the mode of teletext depress the EXIT [23] button.
The Receiver also supports reception of teletext in the mode of VBI. Reception of teletext in that mode is
possible with TV sets having built-in decoder for teletext; whereas the navigation would be possible using
the remote control of the TV set.
This function would only be active subject to rendering the service by the broadcaster.
If subtitles are transmitted by the broadcaster, you
would be able to switch to displaying there of.
1. Depress the YELLOW button [22] . Select
Subtitles in the displayed menu window and
depress the button [8] or OK [24].
2. In the displayed list select the preferable language
for subtitles and depress the button [8] or OK
[24]. Now the picture would be accompanied with
subtitles.
To switch the subtitles o:
1. Depress the YELLOW button [22] . Select Subtitles
and depress the button [8] or OK [24].
2. In the displayed list select Exit and depress the button [8] or OK [24].
This function would only be active subject to rendering the service by the broadcaster.



72
NOTE!
NOTE!