Operation Manual



75
In case where necessary, the operator of satellite TV
can start the service of updating of the Receiver’s
software by a signal from satellite.
During switching between the operator’s channels
an information banner would appear with a
message about new available SW, and a request for
acknowledgement of the update. To acknowledge
the request you should select Yes with the help of
the buttons or [8] and depress the OK [24]
button.
After acknowledgement the update procedure
would start and the screen would display a message containing the scale of execution of the update.
At that stage download of the update would be performed. The front panel would display percentage
of download. In case of successful replacement of the software the Receiver would automatically restart
with a new version of the SW.
During the process of software updating it would be necessary to provide uninterrupted power supply of
the Receiver. Otherwise the Receiver can be seriously damaged (you would have to address the service
organisation for repairs).
The user’s settings can be lost after SW updating (it depends on the requirements of the operator).

NOTE!
WARNING!