Operation Manual
76
Never switch o the power supply of the Receiver during updating of SW!
The previous session of working with USB ash-store in the personal computer shall be correctly completed!
The ash-store shall comply entirely with the USB 2.0 specication!
Operating procedure when updating the SW via
USB:
1. Insert the USB ash-store with SW update into
the USB port of switched-on Receiver.
2. A message would be displayed, about the
available update.
3. Select Yes and depress the ОК [10] button.
4. Receiver would download the SW from the ash-
store, and the process of SW updating would start.
5. Wait until displaying, on the front panel, of the
symbols «b-XX», where ХХ is the percentage of SW
updating.
6. Remove the ash-store from the USB port without waiting until completion of the process of
updating.
7. After replacement of the software the Receiver would automatically restart with the new version of
the SW.
The Main Menu is called by depressing the button
MENU [17].
The Main Menu and all enclosed sections are full-
screen.
The structure of the full-screen Menu:
Menu title; •
Context help eld – contains the information •
about possible actions (selection from the list, entry
of value, etc.) for each item of the Menu;
Panel of function buttons – contains four •
coloured buttons in the same order as on the
remote control. If a button is active, it has the name
(change, rename, etc.); if a button is inactive, it has no name;
Menu items – to select a Menu item, use the buttons • / [8], to acknowledge the selection, use OK
[24], to cancel, or to move one level up, use EXIT [23].
NOTE!