Use and Care Manual

General Tools & Instruments
75 Seaview Drive, Secaucus, NJ 07094-1806 • TEL: [phone] TOLL FREE: 800. 697. 8665
[e-mail] www.generaltools.com 836SS Printed in USA 08/16
For years craftsmen and tradesmen have been making various templates
to maintain accuracy and provide regularity for repetitive operations. These tem-
plates often take considerable time to produce and are discarded after use.
The unique and versatile ANGLE-IZER
™
can replace the need for making tem-
plates in many areas and can be used again and again. The ANGLE-IZER
™
can be
set up in seconds not only improving quality but saving time.
With an increase in demand within the industry for quality and decorative
features, the ANGLE-IZER
™
should be an essential part of any Builders, Craftsmen
or Do-It-Yourselfers Tool Kit.
Repetitive Marking (Brick)
Repetitive Marking (Tile) Easily Transferred to Mark
Every Brick
Set to Mark any Angle
Marking Circles Angles for Roof/Hanging Tiles
Gauging Half Bricks Mark Laminate Flooring for
Cutting
Birds Mouth
T-Square for Aligning
Gauge 10mm Standard
Brick Joints
Corbelling, any Distance
Folds Easily for
Storage
For a Perfect Fit
Fiberglass Filled Nylon
for Added Strength
and Flexibility
Axed Shape for Bullseyes
and Arches
A
B
C
D
The metric and inch scaling on each
arm has been laser engraved to withstand
the day-to-day wear and tear of profes-
sional on-site conditions.
All the arms are dual-calibrated in
inches and metric measures. You are
able to re-assemble The ANGLE-IZER
™
arms to provide inner/outer sides with
whichever scale suits your requirements.
Arms “A” and “D” are calibrated with
the “O” position at dead center to assist
with the symmetrical marking
of bricks, tiles, etc.
Unique Tightening Mechanism
for One-Handed Operations
Central Point at “O”
No. 836 - ANGLE-IZER
TM