Installation Guide

Installation Instructions for

Tresa 6 Light Chandelier

1.0

AEC1036

CHANDELIER

Visual Comfort & Co. reserves the right to change specifications for product improvements without notification.

7400 Linder Ave., Skokie, IL 60077

T 847.410.4400 | F 847.410.4500

www.generationlighting.com

SAVE THESE INSTRUCTIONS!

CAUTION RISK OF FIRE-

This product must be installed in accordance with the applicable

installation code by a person familiar with the construction and

operation of the product and the hazards involved.

Use minimum 90°c supply conductors.

GP I :ENERAL RODUCT NFORMATION

These fixtures are intended to be installed utilizing compliant junctionNEC

boxes.

This product is safety listed for damp locations.

Incandescent version may be dimmed with a standard incandescent dimmer.

LED LEDversion may be dimmed with a dimmer. Consult lamp manufacturer

for additional information.

This instruction shows a typical installation.

PAGE 1
Installation Instructions for AEC1036 Tresa 6 Light Chandelier AEC1036 1.0 CHANDELIER GENERAL PRODUCT INFORMATION: These fixtures are intended to be installed utilizing NEC compliant junction boxes. This product is safety listed for damp locations. Incandescent version may be dimmed with a standard incandescent dimmer. LED version may be dimmed with a LED dimmer. Consult lamp manufacturer for additional information. This instruction shows a typical installation.
PAGE 2
Assemble the Lamp 1A 2 JUNCTION BOX 7 SHADE BRACKET 6 2 SOCKET MOUNTING PLATE 4 HALF BALL SHADE 1 LAMP 9 CANOPY COLLAR NUT HALF BALL ASSEMBLY 10 SPACER 3 FIXTURE 1 Screw the half ball to the stem. 2 Install the shade by aligning the holes on the shade with the holes on the bracket, then secure in place using the shade screws.