Manual

Owner's Manual
Operation
Purge button
Outlets
Voltage Meter
Fuel Intake Valve
Pull Start Key Start Key Start
Circuit Breaker
NOTE: THE PARTS LISTED ABOVE ARE HELPFUL FOR LOCATING THE
CONTROLS MENTIONED BELOW.
CAUTION: PRIOR TO FIRST USING THE GENERATOR, THE ENGINE MUST BE
FILLED WITH OIL OF A HIGH QUALITY SAE 10W=30 GRADE ENGINE OIL.
TO DO SO, UNSCREW AND REMOVE THE ENGINE'S OIL DIPSTICK LOCATED
AT THE BOTTOM OF THE ENGINE CRANKCASE. FiLL THE ENGINE'S
CRANKCASE UNTIL THE OiL LEVEL IS LEVEL WITH THE UPPER MARKED
LINE ON THE DiPSTiCK. THEN SCREW THE DiPSTiCK BACK iNTO
THE OiL FiLL HOLE.
Fuel intake Valve: Propane hose connection.
Pull Start: Manual start.
Key Start: Key start
Key Start Circuit Breaker: Circuit breaker for key start.
Oil Fill: To check and fill oil.
Voltage Meter: Measures voltage
Outlets: Plugs for appliances, etc.
Hour Meter: Measures generator usage.
Circuit Breaker: Breaker for outlets incase of overloads.
Purge Button: To fill the generators lines with propane when cold starting.
19