Manual

Owner's anLlal

Installation (cont'd)

Supporting and Mounting

Mount the generator on a concrete slab capable of supporting the weight of the generator. The

slab must extend on all sides beyond the frame by at least one foot. Contact a cement contractor

for slab specifications if necessary. Attach the frame to the concrete slab using 3/8" diameter

expansion anchor bolts (not supplied).

Grounding

NOTE: IT IS RECOMMENDED THAT ONLY A TRAINED AND LICENSED

ELECTRICIAN PERFORM THIS PROCEDURE

Connect a #6 AWG grounding wire (not included) from the ground connector on the

generator power panel (picture below) to a grounding rod (picture below). It must be driven

at least 24" deep into the earth (Soil). The grounding rod must be an earth-driven copper or

brass (electrode) which can adequately ground the generator.

Ground Connector