Installation & Assembly

1.Separate the Mounting Plate(B) from the Lampbody(D) by removing the Canopy Nut(G) anti-clockwise.

2.Attach the Mounting Plate (B) onto the J-box and secure it by turning 2 Mounting Screws (C) clockwise till tight.

*Note: When parallel wire ( SPT I & SPT II ) is used. The neutral wire is square shaped

and ridged and the hot wire will be round in shape and smooth. ( See Illustration on left. )

Grounding Instructions:

Clear, Brown, Gold or Black without Tracer (colored

stripes) Clear, Brown, Gold or Black with Tracer (colored stripes)

Insulated Wire (not green) with copper metal conductor Insulated Wire (not green) with Silver metal conductor.

Black White

* Parallel Cord (round & smooth) * Parallel Cord (square & ridged)

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and

hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 20 minutes.

Connect, Hot, Black or Red Outlet Supply Wire to: Connect, Neutral, White Outlet Supply Wire to:

2/2

a) For installation in the United States: Wrap ground wire from outlet box around green

ground screw(F) on mounting bracket, no less than 2" from wire end. Tighten ground screw. If

fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector.

b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire

around green grounding screw on mounting bracket. Tighten ground screw.

3.Attach the Canopy of the Lampbody(D) to the Mounting Plate (B) and fix it by turning the Canopy

Nut (G) clockwise.

4. Unscrew the 3 Shade Screws(E) from the Lampbody(D).

5. Insert the bulb (I) into the Socket. Be sure to use light bulb(I) with wattage no greater than

specified on this fixture. Make sure that electrical current is turned off before changing bulbs.

6.Place the Glass Shade(F) over the socket and fix it in place by turning the Glass

Screws(E) clockwise till tight.

PLEASUE USE TYPE"B" BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED MAX 9-WATT

OR TYPE"G" EDISON BULB 40-WATT

THERE IS 1 X 25W EDISON BULB IN THE BOX.

ENJOY YOUR LAMP

2/2