User Manual

GEPE DIABETRAKTARE
G 5003
Bruksanvisning
Apparatens delar:
1 Kåpa 6. Stödklack
2 Grepp* 7. Bottenplatta
3 Lins* 8. Mask
4 Betraktningsbord 9. Strömbrytare
5 Nätuttag
* Grepp + Lins = Förstoringsslid
Isättning av batterier:
Öppna batteriluckan på apparatens undersida och sätt i 6 batterier typ “ AA “. Var noga
med att vända batterierna åt rätt håll enligt markeringarna. Sätt tillbaka batterilocket.
Som extra tillbehör nns en 9V / 600 mA nätadapter, som då ansluts i nätuttaget.
Handhavande:
1 Öppna kåpan tills den kommer i 90° mot betraktningsbordet.
2 Förstoringssliden sätts på plats genom att passa in dess skåra på undersidan med fästet
ovanpå det rörliga locket, så att den kommer parallellt med betraktningsbordet. Se bilden
ovan.
3 Sätt strömbrytaren i läge “ ON “
4 Masken används vid betraktande av 5 x 5 cm diabilder.
5 Skjut förstoringssliden åt vänster eller höger efter önskemål.
6 Apparaten kan lutas genom att fälla ut stödklacken på apparatens undersida
Observera:
1 Tag ur batterierna om apparaten ej skall användas under en längre period.
2 Byt alla batterierna samtidigt.
3 Linser och annat kan rengöras med en mjuk putsduk.
4. CCFL-lamporna innehåller kvicksilver och skall efter förbrukning tas om hand på
lämpligt sätt.
5. Reparation skall endast utföras av verkstad.
Tekniska data:
Strömkälla: 6 x 1,5V Alkaline AA-batterier eller nätadapter 9V / 600 mA ( extra
tillbehör )
Lins: 2X förstoring, 71 x 71 mm
Ljuskälla: Cold Cathode Fluorescent lamp ( CCFL )
Färgtemperatur: 5000K ± 270
Mått: 26 x 14.4 x 2.0 cm
Belyst yta
Full: 6.45 x 22.9 cm
35 mm: 5.1 x 22.9 cm
Kapacitet: 6 omonterade 35 mm bildrutor
5 monterade 5 x 5 ( 35 mm ) dia
3 monterade 6 x 6 eller 4,5 x 6 cm dia
3 monterade 6 x 7 dia
2 bildrutor 6 x 12 cm
1 bildruta 6 x 17 cm
GEPE SLIDE VIEWER
G5003
Instructions
Various Parts of the Slide Viewer:
1 Folding Cover 6 Tilt Bracket
2 Lens Bracket* 7 Base Plate
3 Magnifying Lens* 8 Cropping Mask
4 Viewing Surface 9 On/off Switch
5 Power Jack
* lens bracket + magnifying lens = sliding magnier
Battery Loading:
Remove battery compartment cover from bottom of the slide viewer. Insert 6 “AA”
alkaline batteries aligning them per the markings. Replace cover. Or an AC 9V 600
mA adapter can be used by plugging it into the jack (809001-120V, 809091 UK).
Operation:
1. Open the Folding Cover until it is 90 degrees to the Viewing Surface.
2. Place the Sliding Magnier on the slot on its underside to the top edge of
the Folding Cover so it is horizontal and the Lens is parallel to the Viewing
Surface.
3. Slide the On/Off switch to the “On” position to turn on the light.
4. To view 35mm slides or lm, lift the mask to cover the excess area of the
Viewing
Surface. To view 2 1/4 slides or 120/220/70 mm lm, fold the mask to expose
the
Viewing Surface completely.
5. Slide the Magnier left or right to position it over the slide or lm to be viewed.
6. For more comfortable viewing, use the tilt bracket on the bottom to tilt the unit.
Caution:
1. If the viewer will not be in use, remove the batteries and keep in a dry place.
2. If the light intensity drops, replace the batteries. Replace all batteries at one
time.
3. Clean the Lens and the Viewing Surface with a soft dry lens cleaning cloth.
4. The CCFL tubes contain mercury. Consult local regulations concerning treat-
ment of
hazardous wastes when disposing of the lamps.
5. Do not try to open or repair the unit as this must be done by qualied technicians.
Specications:
Power Source 6 x 1.5V AA Alkaline cells or 9V 600 mA AC adapter (optional)
Glass Lens 2X
Light Source Cold Cathode Fluorescent Lamp (CCFL)
Color Temperature 5000 K + 270
Size 10.2 x 5.7 x 0.79” (26 x 14.4 x 2 cm)
Net Weight 16.9 oz w/case less batteries (479 g)
Illuminated Area
Full 2.54 x 9” (6.45 x 2.29 cm)
35 mm 2.0 x 9” (5.1 x 22.9 cm)