Installation Sheet

Adjustable Wrench /Llave ajustable /Clé à molette
Needle-nose Pliers /Alicates de extremos finos / Pince à bec effilé
1. Remove the existing showerhead from the shower arm. Clean the debris from
the inside of the shower arm and the shower arm threads. Run water to flush
the residual debris from the inside arm (Fig 1).
2. Wrap the threads of the shower arm with the plumber's tape (included) (Fig 2).
3. Attach the new showerhead to the shower arm by turning clockwise. Tighten
with a wrench (Fig 3 & 4).