Installation Sheet

ManualsBrandsGerber ManualsPlumbingSurge 5-Function Handshower, 1.75 GPM, in Tumbled Bronze

Need Help?

Please call our toll-free Customer service line at

1-888-328-2383

WWW.DANZE.COM

for additional assistance or service.

Requiere asistencia?

Favor llamar a nuestro servicio a clientes sin costo al

1-888-328-2383

WWW.DANZE.COM

para asistencia adicional o

servicio.

Besoin d’aide?

Veuillez communiquer avec notre service à la clientèle au numéro sans frais

1-888-328-2383

WWW.DANZE.COM

pour

obtenir du service ou de l’aide additionnels.

Tools You Will Need

Outils dont vous aurez besoin

Herramientas Necesarias

(2) Adjustable wrenches Needle-nose Pliers

(2) Clés à molette Pince à bec efﬁlé

(2) Llave ajustables Alicates de extremos ﬁnos

Showerhead

Pomme de douche

Cabeza de ducha

D462025/D462024

D462029

D462032/D462033

D462034/D462035

D462038/D462039 D462026 D465006

For D462024/D462026/D462029/D462033/D462034/D462035/D462038/

D462039/D465006

This product is engineered to meet the EPA WaterSense flow requirement.

The flow rate is governed by the flow rate controller. If replacement is ever

required, be sure to request appropriate flow rate controller to return the

product to its intended maximum flow rate and other EPA requirements.

Este producto está diseñado para cumplir con los requisitos de flujo de

agua del Programa EPA WaterSense. La tasa de flujo está regulada por el

controlador de flujo. Si es necesario reemplazarlo, asegúrese de solicitar un

controlador de flujo apropiado para devolver el producto a su caudal máximo

previsto y a otros requisitos de la EPA.

Ce produit est conçu pour respecter les exigences de débit d’eau du

programme WaterSense de l’EPA. Le débit est réglé par le régulateur de débit.

Si un remplacement est nécessaire, assurez-vous de demander un régulateur

de débit approprié pour retourner le produit à son débit maximal prévu et aux

autres exigences de l'EPA.

Adjustable

Wrench

Llave ajustable

Pince à bec effilé

Clé à molette

Needle-nose Pliers

Alicates de extremos finos

Shown/Mostrado/Illustré

D462036/D462047

D462046/D461046

1. Remove the existing showerhead from the showerarm. Clean the debris from

the inside of the showerarm and the showerarm threads. Run water to flush

the residual debris from the inside arm (Fig 1).

2. Wrap the threads of the showerarm with the plumber's tape (included) (Fig 2).

3. Screw the showerarm mount onto the showerarm supply pipe threads (Fig 3).

4. Connect the shower hose to bottom outlet of the showerarm mount and handshower

(Fig 4).

5. Place the handshower with conical attached into the showerarm mount holder (Fig 5).

Douche à main multifonction

Ducha de mano con multifunción

D462030

D462025

Multi-Function Handshower

Adjustable

Wrench

Llave ajustable

Pince à bec effilé

Clé à molette

Needle-nose Pliers

Alicates de extremos finos

Shown/Mostrado/Illustré

D462036/D462047

D462046/D461046

1. Remove the existing showerhead from the showerarm. Clean the debris from

the inside of the showerarm and the showerarm threads. Run water to flush

the residual debris from the inside arm (Fig 1).

2. Wrap the threads of the showerarm with the plumber's tape (included) (Fig 2).

3. Screw the showerarm mount onto the showerarm supply pipe threads (Fig 3).

4. Connect the shower hose to bottom outlet of the showerarm mount and handshower

(Fig 4).

5. Place the handshower with conical attached into the showerarm mount holder (Fig 5).

Douche à main multifonction

Ducha de mano con multifunción

D462030

D462025

Multi-Function Handshower

Summary of content (4 pages)

PAGE 1
Showerhead Pomme de douche Cabeza de ducha Multi-Function Multi-FunctionHandshower Handshower Ducha Duchade demano manocon conmultifunción multifunción Douche Doucheààmain mainmultifonction multifonction D462025/D462024 D462029 D462032/D462033 D462034/D462035 D462038/D462039 D462026 D465006 For D462024/D462026/D462029/D462033/D462034/D462035/D462038/ D462039/D465006 Tools You Will Need Outils dont vous aurez besoin Herramientas Necesarias This product is engineered to meet the EPA WaterSense flow req
PAGE 2
. Wrap the threads of the showerarm with the plumber's tape (included) (Fig 2). D462046/D461046 Llave ajustable 3. Screw the showerarm mountde onto the showerarm supply pipe threads (Fig 3). Alicates extremos finos 4. à Connect hose à to bec bottom Shown/Mostrado/Illustré Clé molettethe showerPince effiléoutlet of the showerarm mount and handshower (Fig 4). 5. Place the handshower with conical attached into the showerarm mount holder (Fig 5). 1. Remove the existing showerhead from the showerarm.
PAGE 3
1. Remove the showerhead from the hose by unscrewing the hose conical counter-clockwise (Fig 1). 2. The flow controller/check valve is located at the opening of the 1. Remove the showerhead from the hose by unscrewing the hose handshower handle and has a different color plastic housing than conical counter-clockwise (Fig 1). the handshower conical threads (Fig 2). Use the needle-nose pliers 2.
PAGE 4
Maintenance Your new faucet is designed for years of trouble-free performance. Keep it looking new by cleaning it periodically with a soft cloth.Avoid abrasive cleaners, steel wool and harsh chemicals as these will dull the finish and void your warranty. Warranty Registration: Please log on to danze.com to register your product today.