Installation & Assembly

Operation Manual

DANZE ALWAYS RECOMMENDS THAT PLUMBING PRODUCTS BE INSTALLED BY A LICENSED PROFESSIONAL.

NOTE : Before trim installation, make sure the

finished wall falls between the limits marked on the

plaster guard.

Remove the plaster guard from the 3/4” mixing valve.

Install limit stop, making sure the gun sight and notch on

the valve cartridge stem are all aligned (see illustration).

Place the gasket and escutcheon over valve stem and attach with

handle trim ring. Secure the wall escutcheon by rotating the handle

trim ring clockwise.

Note: locate the notch in the escutcheon at the bottom.

WARNING!

Do not rotate cartridge stem without trim in place or designated in the adjustment procedure.