Operation Manual

15
only available if the movie over DVB-S reiceiver or DVD Player
supports Dobly Digital or DTS signal.
5. Coaxial (digital) Audio Output
(RCA yellow) Only available in HDMI mode
Connect the TV over RCA with an external 5.1 amplifier. Supports
Dolby Digital and DTS signals. This interface is activated in HDMI
mode (not in analog TV mode). The 5.1 sound is only available if the
movie over DVB-S receiver or DVD Player supports Dobly Digital or
DTS signal.
6. Component (RCA green, blue, red)
Connects a three separate component video signal form a
component output jack of a DVD player or Set Top box. Supports
480i/60Hz, 480p/60Hz, 576i/50Hz, 576p/50Hz, 720p/60Hz,
1080i/50Hz, 1080i/60Hz signals (i: interlace,p: progressive)
7. Audio Output (RCA red/white)
Audio Output is always activated (depends on the select source). So
you can connect an external music amplifier to send stereo sound
over bigger loudspeaker
8. Audio Input (RCA red/white)
Audio Input for Component source.
9.HDMI 1
Connection with a digital video signal from a HDMI-output box of
a HD DVD Player or a Set-Top-Box. Supports HDMI Version 1.0.
10.HDMI 2
Connection with a digital video signal from a HDMI-output box of
a HD DVD Player or a Set-Top-Box. Supports HDMI Version 1.0.
11.PC-Audio-Input (3,5mm jack)
Connection of a PC soundcard to the TV, for the transfer of
tones, if your PC is connected to a D-Sub-cable
12.RGB PC-INPUT (D-SUB)
Connection with a video signal from PC a video output box. The
connection cables to PCs differ according to the appliance,
please refer to your retailer.
13.On-/Off Switch
Switch the TV ON or OFF.
14.PLUG -ELECTRICITY INPUT BOX
Plug in the enclosed electricity cable as far as possible. Insert
the plug correctly in the socket.