Operation Manual

51
SETUP
▶ Time ▶ Off Timer
This PDP/LCD can be set to turn off automatically at specific time that you chose.
Before using timer, you must set the PDP/LCD’s Time as described previously.
1. Press MENU button to display the
main OSD menu.
2. Select the TIME main menu with
CH+/CH- button on the remote control.
3. Press ENTER to enter the sub menu.
4. Select Off Timer by pressing VOL+
button.
5. Move the cursor by pressing VOL-,
VOL+ button and adjust off time by
CH+ and CH- button.
(Notice: You can’t see the real time on
this picture since this picture isn’t a
real operating mode but a design mode. In a real mode, you can see the real clock time.)