Super 130.3 Super 135.3 Super 145.3 Works Super 150.3 Super 160.3 Works User Guide (07.
The instruction consists of 4 parts. Part 1:3 Safety Instructions. Part 2:3 User Guide. Part 3:3 Troubleshooting, Technical Data and Disposal. Part Warranty Conditions. Part 1:3 - Safety Instructions Before first use of the machine, read the instructions carefully. Save instructions for later use. Safety instructions marked with this symbol must be observed to prevent personal injury or serious damage to property.
• If the supply cord is damaged, it must be replaced by an authorized Gerni distributor or similar qualified person in order to avoid a hazard. • No actions needed for adjusting machines marked with dual voltage and frequency. • Supervise children not to play with the machine. • The operator and any one in the immediate vicinity of the site for cleaning should take action to protect oneself from being struck by debris dislodged during operation.
Part 2:3 User Guide Super 130 Super 135 Super 145 Works Super 150 Super 160 Works 4
A A1.1 A1.2 A2.1 A1.3 x1 A1.4 A1.5 A1.6 A2.2 A2.3 A2.4 A3.3 A3.1 A3.
A A3.4 A3.6 A3.5 A3.7 A3.8 B B1.1 B1.2 B1.3 B1.5 B1.4 B1.6 6 B1.7 B1.
B B1.9 B1.12 B1.11 B1.10 MPa bar B2.1 B2.2 MPa bar C C1.1 C1.3 C1.4 C1.5 C1.2 C1.
C C1.7 C1.10 C1.9 C1.8 C1.11 D Not relevant E E1.1 8 E1.2 E1.3 E1.
F F1.4 F1.1 F1.2 F1.3 F1.6 F1.5 F1.10 F1.9 F1.8 F1.7 F1.12 F1.11 F1.14 F1.13 F1.
G G1.2 G1.1 G1.3 G1.6 G1.5 G1.4 G1.
H 128500382 Water Suction Kit 128470462 Rim Brush Head 128500671 Inlet Water Suction Hose 3 m 128500461 Garden Brush Head 128500385 Click&Clean Auto Brush 128500380 Rotary Brush 128500386 Click&Clean Underchassis Nozzle 28500388 Drain & Tube Cleaner - 15 m 128500387 Click&Clean Auto Nozzle 128500701 Classic Patio 128470460 Multi Brush (incl.
Part 3:3 - Troubleshooting, Technical Data and Disposal Troubleshooting To avoid unnecessary disappointments, you should check the following before contacting the Gerni service organization. Symptom Cause Recommended action Machine refuses to start Machine not plugged in Defective socket Fuse has blown Defective extension cable Plug in machine Try another socket. Replace fuse. Switch off other machines. Try without the extension cable.
Technical Data Super 130.3 Electric specifications 230-240 V fnom 50 Hz 2.0 kW 2.1 kW 2.3 kW 2.3 kW Inom 9A 9A 10.5 A 10A 10.5 A IP XX pnom pmax Q Qmax Max water inlet temp. suction mode Kick-back force Weight Hand-arm vibration according to: Standard nozzle Super 160.3 Works 2.1 kW Protection degree Max water inlet temperature Super 150.3 Pnom Class I/ Class II Max. water inlet pressure Super 145.3 Works Unom Protection Class Hydraulic specifications Super 135.3 Class I 12.
Warranty Conditions Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
AUSTRALIA: NEW ZEALAND: Nilfisk Pty Ltd Unit 1/13 Bessemer Street Blacktown NSW 2148 Accent Tools Ltd 232 Bush Rd Albany Auckland 0632 Phone: 1300 556 710 E-mail: Info.au@nilfisk.com Phone: 09 968 2610 E-mail: sales@accent-tools.co.