Operation Manual

DATA MANAGER - GET DATA ACQUISITION SOFTWARE rev. 01

ENGLISH

3.2.5 Overview window (overview bar)

The default position of the overview window is in the bottom left-hand corner of the window. This area

provides an overview of the session used, listing the available laps and displaying the graphs of the channels

selected for the whole session.

The part of the lap displayed in the analysis window is marked off by a rectangle with grey edges, while the

numerical value indicating the lap selected is highlighted in white. By dragging the rectangle onto the

overview window, the corresponding area is displayed in the analysis window.

At the top of the overview window, there is a series of tabs which represent the list of laps selected in the

project in use. It is possible to open the laps displayed here quickly, by simply clicking on the corresponding

tab.

3.2.6 Course window (Track Bar)

The default position of the course window is in the bottom right-hand corner of the program window. In this

area, the image of the course associated with the session in use is displayed.

If more than one lap has been added to the current display, the trajectory of the selected lap is shown in the

course window.

The part of the lap displayed in the analysis window is shown in the course window with a white line beside

the trajectory of the selected lap. This line is only visible when not in trajectory analysis mode (I button on the

quick functions bar).

LAP CORRECTLY DISPLAYED IN THE ANALYSIS WINDOW

LAP TAB