Operation Manual

DATA MANAGER - GET DATA ACQUISITION SOFTWARE rev. 01

ENGLISH

3.2.10.2 Setting reference values

The Ref function, which can be activated by clicking on the boxes in the fourth to last column of the channels

window, allows the user to set up to three reference values for each channel.

The reference values allow the user to have horizontal lines on the analysis window, on a level with the

assigned values. These lines are mainly used as a reference when studying the channel graphs, like, for

example, a lambda probe: it is possible to set the ideal lambda value and compare it to the actual value

measured during acquisition.

Ref

FUNCTION

COLUMN

CHANNEL

REFERENCE LINES

INSERTION WINDOW

REFERENCE LINE