Operation Manual

DATA MANAGER - GET DATA ACQUISITION SOFTWARE rev. 01
2013 - GET by Athena Evolution - All rights reserved
ENGLISH
25
Once the OK button has been pressed, a channel with the name of the original channel is created and the
ending _f is added. The new channel will be visible in the analysis window if the original channel was visible.
If this was not the case, it must be selected manually.
3.2.10.4 Calibration
The calibration of a channel is an essential operation to convert the signals, collected by the sensors, into
data understandable to the user.
The Calibration screen opens by clicking on the desired channel’s Calibrate button with the left button of
the mouse button (see figure below).
ORIGINAL CHANNEL
FILTERED CHANNEL