Operation Manual

DATA MANAGER - GET DATA ACQUISITION SOFTWARE rev. 01
2013 - GET by Athena Evolution - All rights reserved
ENGLISH
31
3.2.13 Manual alignment
If more that one lap has been added to the project, it is possible to move an individual lap in order to align it
with the others as required. In order to do this, it is necessary to use manual alignment, which can be
activated from the third button on the navigation bar or with the corresponding heading from the context
menu which can be displayed with a right-click on the analysis window.
This mode is only available in the position mode of the analysis window.
Once manual alignment has been activated, it is possible to move the graphs of the lap selected by simply
clicking on the analysis window and dragging the mouse horizontally.
After aligning the lap, click once more on the navigation bar button or on the heading on the context menu of
the analysis window (which can be activated with a right-click above the channel graphs area) to exit manual
alignment mode.
MANUAL ALIGNMENT
BUTTON IN THE CONTEXT
MENU
MANUAL ALIGNMENT
BUTTON