Operation Manual

DATA MANAGER - GET DATA ACQUISITION SOFTWARE rev. 01
2013 - GET by Athena - All rights reserved
ENGLISH
32
3.2.14 Alignment to a GPS point
Alignment to a GPS point allows the user to align all the open laps in the project to a GPS point indicated on
the selected lap. In order to choose the GPS point to use for alignment, it is first necessary to enter
measuring mode (by double-clicking on the analysis window or by pressing the spacebar on the keyboard).
When the cursor is displayed on the window, move it to the required point, then open the context menu of
the analysis window (by right-clicking in the channel graph area) and select the heading Align to GPS
position. In this way, all the laps will be aligned to the GPS point indicated by the cursor.
3.2.14.1 Resetting the alignments
The last heading in the context menu of the analysis window, Reset alignments, allows the user to erase all
the alignments introduced previously, in order to reset each graph to its original position.
ALIGN TO GPS
POSITION
ANALYSIS WINDOW
IN MEASURE.
MODE
CONTEXT MENU